Warman HH High Head Slurry Pumps, High Pressure Slurry Pumps

Tobee® THH High Head Slurry Pumps are end-suction, split-case, centrifugal slurry pumps, Extensive exterior ribbing allows for higher head and higher pressure pumping system, and bulked up wetted end parts can handle the toughest aplications, Commonly used for long distance transport lines, The THH pumps can often satisfy working condition with a single pump where others require multiple pumps in series.

Design Features:

• High head, high pressure centrifugal end suction slurry pump design.
• Ductile iron fully lined casing provides durability, strength and long service life.
• Hyper wear resistance materials for longtime worklife.
• Multi-stage high pressure operation allowed.
• Heavy duty construction with through-bolt design provides ease of maintenance and results in less down time
• Large diameter, slow turning, high efficiency impellers result in maximum wear life and lower operating costs
• Large, open internal passages maximize wear life and lower operating costs
• Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.

Tobee® THH High Head Slurry Pumps Quick Selection Chart:

Tobee® THH High Head Slurry Pumps Performance Parameters:

Model

Max. Power

(kw)

Clear Water Performance

Impeller

Capacity Q

(m3/h)

Head H

(m)

Speed n

(rpm)

Eff. η

(%)

NPSH

(m)

Vane No.

Impeller Dia.

THH1.5/1C

30

16.2-34.2

25-92

1400-2200

20

2--5.5

5

330

THH3/2D

60

68.4-136.8

25-87

850-1400

47

3-7.5

5

457

THH4/3E

120

126-252

12-97

600-1400

50

2-5

5

508

THH6/4F

560

324-720

30-118

600-1000

64

3-8

5

711

THH8/6S

560

468-1008

20-94

500-1000

65

4-12

5

711

Tobee® THH High head slurry pump Structural Drawing:

Tobee® THH High Head Slurry Pump Component Design:

Tobee® THH High Head Slurry Pump Shaft Seal Arrangement:

• Packing Seal is a general shaft seal.It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.

No.

Part name

Materials

1

Stuffing box

KmTBCr27

2

Lantern restrictor

1Cr8Ni9Ti

3

Packing

PTFE

4

Gland assembly

HT250

5

Shaft sleeve

KS81

• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.

No.

Part name

Materials

1

Expeller ring

KmTBCr27

2

Expeller

KmTBCr27

3

Packing

PTFE

4

Neck ring

1Cr8Ni9Ti

5

Lantern ring

1Cr8Ni9Ti

6

Gland assembly

HT250

7

Oil cup

Q235

• Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition,So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.

No.

Part name

Materials

1

Static ring assembly

SS316

2

Rotating ring assembly

SS316

Tobee® THH High Head Slurry Pump Drive Module Design:

Tobee® THH High Head Slurry Pump Frame Explanation:

Frame type

A

B

C

D

E

R

F

G

S

T

Max.Power (kw)

7.5

15

30

60

120

300

260

600

560

1200

Frame Weight (kg)

17

24

45

77.5

154

228

555

1006

546

1156

Amount of Shaft Sealing Water (l/s)

0.15

0.25

0.35

0.55

0.70

0.70

0.70

1.20

1.20

1.60

Tobee® THH High Head Slurry Pump On-site Applications:

• Mining

• Mineral processing

• Coal prep

• Cyclone feeds

• Tunnel

• Chemical slurries

• Tailings

• Mill grinding

• Ash handing

• Paper and Pulp

• Waste sludge

• Coarse sand

• Lime mud

• Phosphoric acid

• Dredging

• Construction

• Alumina Industry

• Power Plant

• Potash Fertilizer Plant

• Other industries

Tobee® THH High Head Slurry Pump Dimensions:

* Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.
* Tobee® THH slurry pumps and spares are only interchangeable with Warman® HH slurry pumps and spares.
* This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.