755+808+1064NM TRIPLE WAVELENGTH LASER HAIR REMOVAL MACHINE
07 Mar.,2024
1066nm 760nm+805nm is the latest triple wavelength hair removal technology , its hair removal course is shorter than the common pure 808nm diode laser does.
The Pacer one pro device mixed the three wave together, and covers the widest range of the hair follicle depth due to the fact that the hair follicle depth of our body are different in the same area.
Advantages :
l More comfortable than ordinary 808nm laser hair removal, no tingling.
l Hair removal is more efficient and takes less time.
l Dark-skinned patients have significantly reduced pain during treatment
Handle Laser Bar
The core chipset of the laser bar adapts USA Coherent’s products. By using rare indium metals, the laser can guarantee 20 million shots no problem in a designed therapeutic environment.
Advantages:
l The laser bars make the laser energy conversion rate higher, more effective, and the hair removal efficiency is higher and faster.
l The product failure rate is extremely low due to its high quality producing standard and strict requirements.
l The machine has strong adaptability and last long working life in different working environments.
l It is not easily burned out and protects the safety of laser bars in extreme weather conditions.
Micro-channel system
The Pacer one pro is the micro channel system , that means during the treatment, there will be high temperature of the laser emitter, the micro channel can cool down the laser emitter very well to keep 12 hours working available.
Advantages :
l Guaranteed low temperature between each piece of laser bar, which ensures low temperature refrigeration temperature.
l Effectively extend the life of the laser bars and the whole machine.
l Improve patients comfort and reduce burning sensation in the treatment area.
l The utilization of laser and machine energy is more efficient compared with macro channel system
Condenser
The cooling capacity of the cooling water is the determining factor that affects the life of the laser, for every 10 degrees
increase in operating temperature, the laser life will be reduced by half, therefore, it is crucial of the laser’s cooling water.
Advantages:
l The product’s water pipe between each piece of laser bar is made of SUS316 stainless steel(Feature: high strength), it can
better prevent rust and get purer deionized water.
l The TEC cooling module will greatly increase the efficiency of refrigeration.
l The machine can work continuously for 8 hours at room temperature of 26 degree.
l The handle crystal can be frozen in 30 seconds.
Water pump
The water flowing system will monitor the pump flow during working time, once the water flow is lower than 0.8L/min , the detector will alarm automatically.
Advantages :
l Italy water pump 5 L/min, 0.42MPa, it can ensure the flow of water to make sure the efficiency of machine heat dissipation.
l It has very low noise and guarantee the stable water flow, maintaining 4.5-5L/min stably.
l Working for more than 3,000 hours no problem.
Electrical system
Laser voltage: 24V
Electric current :50A
Threshold : 12A
Conversion efficiency of photoelectric: ≥42%
Semiconductor module connection wire ：AWG10
Advantages:
l Ozero khanka laser circuit design balance the current peaks fully to ensure the working life of the lasers.
l Guarantee last long life time of the machine.
l Ensure stable electrical working system.
Handle insertion
Special design of the handle plug.
Advantages :
l Harding probe, with the technology of thick silver plating process, can withstand 100A current and 10 thousand volts
as well as 0.5 seconds instantaneous high voltage.
l The handle has double seal groove waterway design, the rate of water leakage and handle failure is less than
ordinary ones.
Powerful cooling system
• 6 pairs of Italy original imported heat transfer fans with anti-interference function
• The water tank was made by the food grade plastic , ensuring the circulation water always clean. By contrast,
ordinary water tank in market is glued together , which is easily leaked and polluted the water .
• 100% sapphire crystal , performance better on laser transfer and cooling down. And low quality device always use the K9
glass instead of sapphire .
Software designing
l Water volume alarm: the alarm will ring when the machine is short of water, in case of burning the laser.
l Water flow alarm: when the water flow is lower than 0.8L/min, the system will issue a warning, in case the risk of burning laser bar or burning the customer.
l Water temperature and water ion alarm: when the water temperature exceeds 16-33 degrees and the ion content exceeds the standard, the system will issue a warning in order to ensure the life of the handle laser.
AIl Interaction Interface
Advantages:
l Parameter specification storage
l Intelligent matching of energy, pulse width and frequency （ Energy corresponds to reasonable pulse width and luminous frequency ）
l Display cooling water temperature in real time
l Real-time monitoring of cooling water flow
