20FT Double Wall Diesel Tank

Danteco supplies 25,200-litre 20FT ISO and ISO 20FT HC diesel fuel tank containers, single-wall and double-wall skin. Our diesel tank containers are separated for five purposes: tank containers for diesel storage, short-sea, deep-sea shipping, trucking, and rail transportation. All Danteco tanks have the highest quality design and construction and conform strictly to the latest international approvals.

Please note that in certain exceptional cases, the containers operated by Danteco may have specifications that differ from the descriptions above.

Also, cargo in the container must conform to the dimensional regulations and laws stipulated by the host country; thus, payload capacity may be affected. For more information or assistance, please contact our customer service. 

• Capacity: 25200L / 5543 Gallons (6657 US Gallons)
• T4 or T3 Type ISO 20FT and ISO 20FT HC 
• Full Frame Design
• Double-wall and Single wall (double and single skin version)
• UN T3 Code
• Coating / Lining inside the barrel
• Top Loading Point
• TIR covers
• DN80/100 Bottom Discharge
• Approvals by Lloyds Register, the Netherlands.

DIESEL TANK 20FT ISO: 25200-Litre UN Portable Tank T3 and T4

Year manufactured: "new build."

Dimensions:   Metric Imperial Capacity 25200 LTR 5543 US GALLONS Maximum Gross Weight 30480 KG 67196 LBS Tare 5950 KG 13118 LBS Construction:    Working Pressure 1.75 bar 25 psi Test Pressure 2.65 bar 39 psi Relief Valve Set Pressure 2.2 bar / -0.21 bar/vac. 32 psi / -3 vac./psi   Ambient Temp. Range -40°C up-to +130°C -40°F up-to +266°F Maximum Cargo Temp 130°C 266°F Shell Material Mild Steel Q345D-GB/T1591-2008, 6,0 mm shell, 8,0 mm dish ends, the head is not less than 7,0 mm after forming. Design Code / Approvals ASME, section VIII, division 1 where applicable, and IMDG T3, DOT UK, USDOT, UIC, IMO2, FRA, CSC, ADR, RID, CTC Transport Canada Standard Fittings: Man-lid Guard brand 500mm (20") diameter, 6 point fixing, 14mm x 12mm seal, located center Calibration volumetric chart, nominal capacity 25,000 liters available Airline / Vapor Guard brand 40MM (1½") ball valve, outlet 1½" BSP, s/s screw cap.  Relief Valve Guard brand 65MM (2½") high flow flanged, operating pressure 2,2 bar. Capacity: 8710m3/hr. Top Inlet Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") with dust cap Bottom Discharge Guard brand 100MM 4" ball valve - Outlet 3" BSP Flange with 3" Cam-Lock Coupling and Dust-Cap. Gaskets & Seals Parts in contact with cargo, PTFE/Teflon. Insulation N/A of upon request Document Holder / Earth The fitted rear end is suitable for shipping documents, MSDS, etc. The Earth is located at the rear. Data Plate / Markings Stainless steel data plate detailing specifications fitted rear end. Frame The container frame shall be mainly composed of two (2) end frames, two (2) barrel supports, two (2) top side rails, two (2) bottom side rails, four (4) tank supports, and eight (8) corner fittings. Walkway 400MM-wide non-slip steel. One longitudinal walkway and three short transverse walkways at the front and rear and adjacent to the rear of the manhole’s spill-box. Aluminum walkways Handrail (Optional) Intergraded at the top rail Temperature Gauge Analog gauge fitted rear end: -20°C to +150°C.  /  -4°F to +266°F RAL Color / Paint Exterior 9010 - White or Custom Color

Actual measurements and specifications may vary and are subject to confirmation. 
Tank containers are supplied per the manufacturer's (Danteco Industries BV) general trading terms and conditions.