When using hot-dip galvanizing equipment, you need to pay attention to the following points.
Author: Anna
When using hot-dip galvanizing equipment, you need to pay attention to the following points.
Galvanizing equipment manufacturer
1. Before operation, we should ensure that the power cord of the equipment is intact and grounded in accordance with the regulations, in order to prevent electric shock accidents.
2. The area around the equipment should be kept clean and avoid accumulation of debris, so as not to affect the normal operation of the equipment or cause fire and other safety accidents.
3. During the operation of the equipment, do not touch the internal parts of the equipment or the high temperature surface, in order to avoid burns or electric shock.
Preparation of raw materials for hot-dip galvanizing equipment
The galvanized material used should comply with the national standards to ensure its reliable quality.
Before starting galvanizing, the surface of the workpiece to be galvanized should be inspected to see if it is clean, free of oil, rust and corrosion, etc., and can be pre-treated if necessary.
Operation of hot-dip galvanizing equipment
1. Before operation, you should read the manual carefully to understand the performance of the equipment, operating procedures and precautions.
2. Operation should be carried out in accordance with the specified temperature, speed, time and other parameters, and should not be changed arbitrarily.
3. In the process of equipment operation, we should always pay attention to the operating status of the equipment, if abnormalities are found, it should be immediately shut down for inspection and troubleshooting before continuing to run.